|
|
|
Frequently Asked Questions:
|
| |
Q. |
HOW MANY MODELS OF CARROT STIX ARE THERE? |
| |
A. |
There are 5 casting and 4 spinning, but there are only
two available at this time, CLTX691P-C and the CLTX671M-S |
| |
 |
| |
Q. |
HOW MUCH DO THE CARROT STIX WEIGH? |
| |
A. |
The Carrot Stix's will vary in weight from
approximately 3.2 oz. up depending on the length and power ratings.
Exact weights are not available. Just Yet. |
| |
 |
| |
Q. |
WHAT IS THE CONSTRUCTION OF THE CARROT STIX BLANK? |
| |
A. |
I'm sorry but the blank construction is proprietary and
we are not at liberty to discuss that, other than it is a combination of
high modulus graphite and nana bio-fibers. |
| |
 |
| |
Q. |
WHAT KIND OF GUIDES ARE ON THE RODS? |
| |
A. |
the guides are made by PAC BAY and have the light
stainless frames and double swagged hard chrome inserts. The inserts
will never crack or fall out as with ceramic guides. |
| |
 |
| |
Q. |
WHAT KIND OF GUIDES ARE ON THE CLASSIC GOLD RODS? |
| |
A. |
The Classic Gold rods have double swagged light
titanium carbide inserts and light weight titanium carbide frames and
are made by PAC BAY, these inserts will never crack or fall out like
ceramics can. |
| |
 |
| |
Q. |
HOW MANY GUIDES DO YOUR RODS HAVE? |
| |
A. |
Our casting rods have 9 guides plus a tip. Our spinning
rods will have 8 or 9 guides depending on length plus a Tip. |
| |
 |
| |
Q. |
DO YOU USE FUJI REEL SEATS? |
| |
A. |
No. Our reel seats are our own designs and are molded
in house from nylon 6 with a graphite filler. |
| |
 |
| |
Q. |
ARE YOUR GRIPS MADE FROM EVA FOAM? |
| |
A. |
No. our grips are made from THERMALON, which is an
improved HYPALON. 20% more dense than Hypalon, it has better tear
resistance than either HYPALON or EVA and can easily be dried off with a
towel. No more wet, slippery cork. |
| |
 |
| |
Q. |
WHAT DO YOU USE FOR WEIGHTS IN THE WEIGHT PORTS TO
BALANCE THE RODS? |
| |
A. |
Many of our rods will not require weighting and will be
in near perfect balance with just the addition of your reel. If
weighting should be necessary we suggest the use of either "Pencil
Leads" or "Mojo Sinkers" both of which are available at your local
tackle dealer. |
| |
 |
| |
Q. |
HOW DO YOU BALANCE THE RODS, THEY DON'T HAVE A SCREW
OFF CAP ON THEM? |
| |
A. |
By removing the small black plastic cap located in the
butt grip. |
| |
 |
| |
Q. |
WHAT IS YOUR WARRANTY POLICY? |
| |
A. |
It is a lifetime over the counter warranty against
material and manufacturer defects. |
| |
 |
| |
Q. |
HOW DOES THE WARRANTY WORK? |
| |
A. |
You can either return the broken rod to the place of
purchase for an immediate replacement, or if it is a mail warranty you
need to cut the area containing the decal from the rod and send it along
with a check for $30.00 to the warranty center to cover shipping and
handling of the replacement rod. Click here to access
on-line activation.
Click here
to download PDF warranty card.
|
| |
 |
|
|
|